RTSP

Browse Available Downloads

[outofthebox dir=”/RTSP Downloads” mode=”files” downloadrole=”all” filedate=”0″ showcolumnnames=”0″ candownloadzip=”1″ showsharelink=”1″ previewinline=”0″]

Features

  • 12″ rounded base
  • Heights from 20′ to 39′

Pole Shaft

Fabricated from coil stock, weldable grade, hot rolled commercial quality structural steel tube which has a wall thickness of 11 gauge or 7 gauge. Shaft conforms to ASTM specifications. Meets or exceeds minimum yield strength of 55,000 PSI. Shaft is furnished with ground lug inside pole, opposite hand hole opening.

Base Plate

  • Fabricated from structural quality hot rolled steel. Meets or exceeds minimum yield strength of 36,000 PSI. Base is circumferentially welded to pole shaft. Bolt holes slotted to provide 1” flexibility on either side of bolt circle. Consult factory for pole base templates.
  • Base templates provided with order. Do not pre-pour.

Base Cover

Standard base cover is square and fabricated from heavy gauge quality aluminum. Two piece cover for easy installation.

Pole Cap

Color-impregnated polymer snap-to-close pole cap provided in black.

Finish

All poles are lightly shot-blasted prior to painting. A Quali-Guard® textured thermoset polyester powder coat is then applied to a minimum of 3 millimeters and then oven-baked at a temperature of 400ºF to promote exceptional adherence and nish hardness. Pole finish is warranted for a full two (2) years.

Anchor Bolts

Poles are provided with hot-dip galvanized anchor bolts, with a “J” bend on one end and two at hex bolts end and two at washers per bolt. Anchor bolts meet or exceed a minimum of 36,000 PSI. Anchor bolts conform to ASTM F1554 grade 36 and are provided.

Find a Representative

[wpsl template=”default” map_type=”roadmap” auto_locate=”true” start_marker=”orange” store_marker=”blue”]

Pin It on Pinterest